Control station type |
Double insulated |
Enclosure material |
Polypropylene |
Electrical circuit type |
Control circuit |
Enclosure type |
Complete ready for use |
Control station application |
Control of single speed hoist motor |
Control station composition |
6 push-buttons + 1 emergency stop |
Control button type |
First push-button 1 NO raise, slow Second push-button 1 NO lower, slow Fourth push-button 1 NO left, slow Third push-button 1 NO right, slow Stop push-button Ø 40 mm 3 NC latching Fifth push-button 1 NO forward slow Sixth push-button 1 NO reverse, slow |
Product compatibility |
ZB2BE101 for each direction XENT1192 for emergency stop |
mechanical interlocking |
With mechanical interlocking between pairs |
Control station colour |
Yellow |
Connections - terminals |
Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable end Screw clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end |
Standards |
EN/IEC 60947-5-1 UL 508 EN/IEC 60204-32 CSA C22.2 No 14 |
Product certifications |
CCC GOST |
Protective treatment |
TH |
Ambient air temperature for operation |
-25…70 °C |
Ambient air temperature for storage |
-40…70 °C |
Vibration resistance |
15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 |
Shock resistance |
100 gn conforming to IEC 60068-2-27 |
Overvoltage category |
Class II conforming to IEC 61140 |
IP degree of protection |
IP65 conforming to IEC 60529 |
IK degree of protection |
IK08 conforming to EN 50102 |
Mechanical durability |
1000000 cycles |
Cable entry |
Rubber sleeve with stepped entry 8…26 mm |