SIEMENS

WITHOUT AOP/BOP AMBIENT TEMP. -10 TO +50 DEG. C PROTECTION IP20 245 X 185 X 195 (H X W X D) SQUARED TORQUE POWER 15 KW OVERLOAD 150% 60 S, 200% 3 S CONSTANT TORQUE POWER 11 KW 3AC 380-480 V +10/-10% 47-63 HZ WITH BUILT-IN CLASS A FILTER MICROMASTER 440 Product reached PM410 Product reached PM410 (product cancelled) on 10/01/19 long delivery time of at least 60 working days. See for replacements: siemens.com/mm4-convert

BPZ:500-033290 SIEMENS Addressable Fire Print Fire Detector HFP-11

Draw-out circuit breaker with slide-in module frame 3-pole, Size 2, IEC In=2500 A to 690 V, 50/60 Hz AC Icu=66 kA at 500 V Rear horizontal connection Overcurrent release ETU 25 LSI protection adjustable 0.4-1 in With manual operating mechanism with storage with mechanical request without 1st auxiliary release without 2nd auxiliary release 2NO+2NC C20= Spring charge status indicator not possible with option F02 C22= Ready indicator F40= Sealing disc for ETU25-76 for protection against unauthorized operation M45= Opening solenoid, overexcited 110-127 V AC/110-125 V DC 5% on-load factor, not for continuous operation R16= Position signaling switch, withdrawable part 6 changeover contacts

SIEMENS - 3TF8633-0A MOTOR STARTERS - CONTACTORS The Siemens 3TF8633-0A is a 3-phase IEC rated compact reversing contactor. It is rated 10 HP at 230V and 20 HP at 460V. It comes with 1NC auxiliary contact.

SIEMENS 3TF86 83-0A 230 V AC COIL REVERSING MOTOR STARTER CONTACTOR

The Siemens Triple IR (IR3) Flame Detector (Series 40 / 40I) is a reliable, compact and self-contained triple-spectrum infrared flame detector that detects fuel-and-gas fires at long distances, along with providing the highest immunity to false alarms. Series 40 / 40I can detect a 1 ft2 (0.1m2) gasoline pan fire at 215 ft (65m) in less than 5 seconds. Series 40/40I also has considerable durability and weather-related resistance. Specifically, Model 40/40I-112SF is comprised of the following: 4-20mA (SINK) wiring; a Normally Closed (N.C) FAULT relay, and Normally Open (N.O) ALARM relay. Model 40/40I-112SF has a maximum operating temperature of 167°F (75°C). It is stainless-steel by design, and has a 3/4 inch National Pipe Thread (NPT) Taper. This product is Factory Mutual Approved, as well as SIL2 (TUV) Approved to IEC 61508.