Olympian Plus filter/regulator, 1/2 PTF, 0.3-10 bar, automatic drain, 40µm filter element, without gauge
High efficiency water removal
Good regulation characteristics
Non-rising adjusting knob has snap-action lock
Medium: Compressed Air
Port Size: 1/2" PTF
Drain Type: Auto drain
Output pressure adjustment: 0.3 ... 10 bar
Body Material: Aluminum
Body Size and End Connection: 1/4 NPT
Maximum Inlet Pressure: 250 psig / 17.2 bar
Maximum Emergency Outlet Pressure: 50 psi / 3.4 bar over outlet setting
Temperature Capabilities: NBR: -40 to 180°F / -40 to 82°C || FKM: 0 to 300°F / -18 to 149°C || Silicone (VQM) Diaphragm and Low Temp Bolting: -60 to 180°F / -51 to 82°C
Features:
Boosted to twice the pressure
No-electricity-needed air booster.
Capable of boosting the primary pressure range up to two-fold (max. 0.99 MPa).
Compact design and flexible installation.
TV500L1005
CONVERTER ISOLATING SIGNAL
INPUTS: 0 / 4..20 MA AND 0 / 2..10 V DC OUTPUTS: 0 / 4..20 MA (MAX. 400 OHM)
0 / 2..10 V CHARACTERISTICS: RISING GALVANIC ISOLATION: BETWEEN INPUT / OUTPUT
Main switch, 3 pole, 25 A, Emergency-Stop function, Lockable in the 0 (Off) position, rear mounting
Main switch, P1, 25 A, rear mounting, 3 pole, Emergency switching off function, With red rotary handle and yellow locking ring, Lockable in the 0 (Off) position
Screw-in adapter with process connection G1/2 inch male thread included in delivery
Electronics housing material/contact with medium 1.4404 (316L)/1.4571 (316Ti)
Immersion depth 64.9 mm
Process value display with bar graph
Flow monitoring for liquid media
Protection classes IP66, IP67 and IP69K
Adjustment of flow speed via teach function
10…33 VDC
NO/NC contact, PNP/NPN output, IO-Link
Connector, M12 × 1
Weight :396 g
7760054123 - Weidmuller 7760054123 Analog Signal Conditioner ACT20P-CI-CO-ILP-S
Walker Industrial
Signal Distributor Current Loop Feed 3.8V 20mA Screw connection
Avnet
Analogue Input Type = 0 ... 20 mA / Analogue Input Type = 4 ... 20 mA / Isolation Input Type = 2-Way / Number of Output Channels = 1 / Current Output Impedance Ohm = 600 / Accuracy % = 0.1 / Output Type = Current / Analogue Output Type = 0 ... 20 mA / Analogue Output Type = 4 ... 20 mA / Cross-Section mm² = 2.5 / Reaction Time ms = 1 / Termination Type = Screw Terminal / Mounting Type = DIN Rail Mount / Series = ACT20P
Distrelec
ISO CYLINDER, DSNU SERIES, 50 MM STROKE, 25 MM PISTON DIAMETER, ELASTIC CUSHIONING RINGS/PADS AT BOTH ENDS, 1-10 BAR OPERATING PRESSURE, DOUBLE-ACTING, G1/8 PNEUMATIC CONNECTION, 193991
The specialty regulator series VBA is a booster regulator that saves money and energy by increasing the main line pressure up to two times. The booster regulator, when connected to air supply line, increases pressure up to two times and the main air supply pressure may be set low. Desired pressure increase can be easily adjusted.
Boosts local line pressure without requiring additional power
2 to 4 times increase in pressure
Easy adjustment of output pressure
Improved performance over previous designs
The Bently Nevada 3300 XL Extension Cables are for use with the 3300 XL Transducer system. The three parts of the system must have consistent electrical lengths. The electrical length of the proximity probe plus the electrical length of the extension cable must equal the electrical length of the Proximitor.