Mode of operation: Double-acting
Piston diameter: 20 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 188 N
Stroke: 25 mm
Cushioning: Elastic cushioning rings/plates at both ends
Mode of operation: Double-acting
Piston diameter: 25 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke: 295 N
Stroke 20 mm
Cushioning: Elastic cushioning rings/plates at both ends
Reliable detection of system pressure in industrial applications
High shock and vibration resistance
Excellent repeatability and low linearity error
Lifespan of more than 60 million pressure cycles
Compact and robust stainless steel housing for use where space is restricted
Pneumatic connection, port 1: Male thread M5
Pneumatic connection, port 2: For tubing outside diameter of 6 mm
Temperature-dependent operating pressure: -0.95 bar - 14 bar
Ambient temperature: -10 °C–80 °C
Nominal size : 2.1 mm
Pneumatic connection, port 1: Male thread R1/8
Pneumatic connection, port 2: For tubing outside diameter of 6 mm
Temperature-dependent operating pressure: :-0.95 bar to 14 bar
Ambient temperature: -10 °C to 80 °C
Nominal size: 4.2 mm
Piston diameter: 16 mm
Theoretical force at 6 bar, advancing 121 N
Stroke: 10 mm
Cushioning: Elastic cushioning rings/pads at both ends
Position sensing for the proximity sensor
Mode of operation: Double-acting
Piston diameter: 40 mm
Theoretical force at 6 bar, advancing: 754 N
Stroke: 250 mm
Cushioning : Pneumatic cushioning, adjustable at both ends
Piston diameter: 25 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke:
295 N
Stroke: 80 mm
Cushioning: Elastic cushioning rings/plates at both ends
Position detection: Via proximity switch
It saves 20% space over the basic length of a corresponding ISO/VDMA cylinder
Low friction, long-life seals
High-strength, double-crimped end cap design
Standard magnetic piston for full control system versatility
aves 20% space over the basic length of a corresponding ISO/VDMA cylinder
Low friction, long-life seals
High-strength, double-crimped end cap design
Standard magnetic piston for full control system versatility
Mode of operation: Double-acting
Piston diameter: 32 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke
: 482.5 N
Stroke: 250 mm
Cushioning : Self-adjusting pneumatic end-position cushioning
Mode of operation: Double-acting
Piston diameter: 25 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke : 295 N
Stroke 50 mm
Cushioning: Elastic cushioning rings/plates at both ends
Pneumatic connection 1: For pneumatic tubing outside diameter 6 mm
Pneumatic connection 2 : for pneumatic tubing outside diameter 6 mm Temperature-dependent operating pressure: -0.95 bar to 14 bar
Ambient temperature: -10 °C to 80 °C
Nominal width: 4.3 mm
Valve function Unlockable, non-return function
Pneumatic connection 1: G1/4
Pneumatic connection 2 G2
Operating pressure: 0.5 bar to 10 bar
Type of mounting: Screw-in with an external thread
Mode of operation: Double-acting
Piston diameter: 32 mm
Theoretical force at 6 bar, advancing 483 N
Stroke: 80 mm
Cushioning Pneumatic cushioning, adjustable at both ends
Filter-pressure regulator Festo LFR-1/2-D-MAXI-MPA is a combination of compressed air preparation devices without an oil sprayer. For this equipment, the Festo line has a modern alternative: air treatment units of the MSB series.
ACH580 HVAC drive offering has all key features built-in to control fans, pumps and compressors, and more complex equipment like air-handling units and chillers, ensuring smooth, energy-efficient operation of your HVAC systems in normal and mission-critical situations. The built-in features significantly reduce installation time and the intuitive control panel with an HVAC-specific primary settings menu and help assistants makes startup, commissioning and operation easy. The optional Bluetooth® capability enables the commissioning and monitoring of the drive from a distance. The ACH580-01 comes in IP21 enclosure and can be installed on the wall as standard. Also, IP55 and flange mounting units are available.